| 16337001 Kaydon Slewing Ring Bearings | Bearing Type:straight; Shaft Dia., Nominal (d):195.0000; Outer Diameter (mm):200; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Bore after Mounting (di) - 200 +0.115 / -0:200 +0.115 / 0; Material:Wrapped bronze with; ID Chamfer Length (Ci):0.600; Housing Bore Dia. (Dh) - 200 +0.046 / -0:200 +0.046 / 0; Shaft Size (ds) - 195 -0.170 / -0.216:195 0.170 / 0.216; OD Chamfer Length (Co):1.800; |
| HS6-33P1Z Kaydon Slewing Ring Bearings | r:1 mm; Bearing number:07097/07196; Basic dynamic load rating (Ca90):4,81; Factor (K):1,45; Factor (Cg):0,0113; Basic dynamic load rating (C90):6,99; Aa:0,3 mm; D:50,005 mm; Da:47 mm; Factor (G2):7,1; Basic static load rating (C0):29,6 kN; Width (mm):13,495; Basic dynamic load rating (C1):27 kN; Weight:0,12 Kg; Factor (G1):7,6; da:29 mm; T:13,495 mm; Calculation factor (e):0,4; d:25 mm; Size (mm):25x50.005x13.495; |
| MTO-470T Kaydon Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:1.5 mm; D:100.000 mm; Da - Cup Frontface Backing Diameter:97.79 mm; e - ISO Factor8:0.46; db - Cone Backface Backing Diameter:72.90 mm; r - Cup Backface To Clear Radius2:1.52 mm; B - Cone Width:23.000 mm; C - Cup Width:17.500 mm; da - Cone Frontface Backing Diameter:71.12 mm; G1 - Heat Generation Factor (Roller-Raceway):57.4; Series:32013X; Y - ISO Factor9:1.31; B:23.000 mm; |
| 92-20 1091/1-37272 IMO Slewing Ring Bearings | Cone Part Number:M252330X; G2 - Heat Generation Factor (Rib-Roller End):226.1; G1 - Heat Generation Factor (Roller-Raceway):1839.2; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:128000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:283000 lbf; db - Cone Backface Backing Diameter:10.71 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:41700 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:492000 lbf; |
| 16335001 Kaydon Slewing Ring Bearings | Weight:0,0184 Kg; Bore Diameter (mm):22; Outer Diameter (mm):30; D:30 mm; Fw:22 mm; Basic static load rating (C0):11,2 kN; Bearing number:HK223012; (Grease) Lubrication Speed:6700 r/min; Basic dynamic load rating (C):9,1 kN; Width (mm):12; C:12 mm; Size (mm):22x30x12; |
| MTO-59 Kaydon Slewing Ring Bearings | Oil Lubrication - M/N Seal:700 rpm; Dimension E:7.000 in; Float:0.083 in; Full Timken Part Number:99999B; Dimension R:0.25 in; C - Dynamic Load (Basic):170000 lb; Dimension M:2.37 in; Dimension D:6.63 in; Pre Install Clearance Max:0.145 mm; Oil Lubrication - B/C/O Seal:400 rpm; Housing Style:Round Flange; Locking Style:Eccentric; Engineering Group:Mounted Bearing; Dimension N:5.450 in; Grease Lubrication - M/N Seal:700 rpm; |
| 16372001 Kaydon Slewing Ring Bearings | Fatigue limit load, Cu:50.8 kN; Nlim (grease):1,600 rpm; Db:193 mm; r1a max:3.3 mm; D:200,025 mm; Bearing number:4T-48685/48620; B:39,688 mm; ra max.:3,5 mm; Nlim (oil):2,100 rpm; Mass:3.89 kg; Min operating temperature, Tmin:-40 °C; Basic static load rating (C0):490 kN; Basic dynamic load rating (C):239 kN; Dynamic load, C:239 kN; Characteristic inner ring frequency, BPFI:19.73 Hz; T:41,275 mm; d1:172.5 mm; |
| RK6-22N1Z Kaydon Slewing Ring Bearings | Static Load Rating (Cor):32; Bore Diameter (mm):2; Material:Martensitic Stainles; Bearing Type:Open; Dynamic Load Rating (Cr):105; Ball Dia (Dw):0.6000; Precision:A1; Outer Diameter (mm):4; Width (B):1.2000; Max. Shaft Shoulder Dia. Inner (Li):2.6; Max Speed (Oil) (X1000 RPM):104; Width (mm):1,2; Outer Dia (D):4.0000; Bearing number:672H; Max Speed (Grease) (X1000 RPM):91; Size (mm):2x4x1.2; Ball Qty:8; |