| 7936CTRSUMP3 NSK Super Precision Bearings | B1:21 mm; d1 ≈:403 mm; B2:39.5 mm; r3,4 min.:5 mm; Mass angle ring:7.4 kg; d:340 mm; |
| 7028A5TRSULP3 NSK Super Precision Bearings | Da:76.2 mm; N:11.5 mm; J6:98.5 mm; Hexagonal key size for grub screw N:3.969 mm; Thread grub screw G2:5/16-24 UNF; Recommended tightening torque for grub screw:6.5 N·m; B4:5.95 mm; Housing material:Cast iron; s1:26.7 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended diameter for attachment bolts, mm G:10 mm; SWN:7 mm; A:32.5 mm; T:46.7 mm; Rα:45 °; N4:2 mm; H:141.5 mm; |
| 7030CTRSUMP3 NSK Super Precision Bearings | A1:111.125 mm; H2:44.45 mm; End plug (suffix Y):EPR 14; Cap bolt recommended tightening torque:298.3 N·m; Max. speed for PosiTrac Plus seal:1350 r/min; H:222.25 mm; A2:155.575 mm; R2:30.163 mm; h:40.481 mm; PosiTrac Plus contact element:2 x B10724-113; Housing:SSAFS 024 KA; da:104.775 mm; Ca:55.804 mm; P150°:48 kN; P120°:52.5 kN; P180°:57.4 kN; L:387.35 mm; Cap bolt, SAE grade:8; |
| 7040CTRSULP3 NSK Super Precision Bearings | Cap bolt, SAE grade:8; Initial grease fill:382.73 g; A1:133.35 mm; Max. speed for Taconite seal:590 r/min; P90°:113 kN; H1:152.4 mm; Appropriate attachment bolt size G:0.875 in; da:130.175 mm; Taconite seal:TER 124; R2:36.513 mm; R1:79.375 mm; H:287.337 mm; P180°:84.5 kN; Pa:25.4 kN; N1:25.4 mm; h:56.356 mm; Housing:SAF 030 KA; P120°:73.8 kN; H2:60.325 mm; Stabilizing ring:2 x SR-0-21; |
| 7026CTRDUDLP3 NSK Super Precision Bearings | Calculation factor e:0.22; Da max.:445 mm; ra max.:3 mm; D:460 mm; Fatigue load limit Pu:265 kN; Limiting speed:320 r/min; D1 ≈:433 mm; Calculation factor Y1:3; Basic static load rating C0:3450 kN; Mass bearing:69.5 kg; d:300 mm; Calculation factor Y2:4.6; b:16.7 mm; B:118 mm; Calculation factor Y0:2.8; K:9 mm; Basic dynamic load rating C:2222 kN; r1,2 min.:4 mm; d2 ≈:334 mm; |
| 7021CTRSULP3 NSK Super Precision Bearings | Mass inner ring:0.078 kg; r, r1,2 min.:0.6 mm; d:50 mm; B:25 mm; F:55 mm; |
| 7930CTRSULP3 NSK Super Precision Bearings | D:47.0000 mm; B:7.00 mm; Grease Speed Rating Open/Shielded n1:13000 rpm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:16000 rpm; Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:8000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:3800 N; Basic Dynamic Radial Load Rating C:4750 N; |
| 7036A5TRSUMP3 NSK Super Precision Bearings | Calculation factor f1:1; Static axial stiffness, preload class A:42 N/µm; Basic dynamic load rating C:12.7 kN; B:12 mm; Attainable speed for oil-air lubrication:48000 r/min; Da max.:68.8 mm; C1:3.53 mm; Preload class C GC:410 N; r3,4 min.:0.3 mm; d2:54.9 mm; db min.:52 mm; r1,2 min.:0.6 mm; Fatigue load limit Pu:0.365 kN; Mass bearing:0.11 kg; da min.:53.2 mm; Preload class B GB:210 N; ra max.:0.6 mm; |